smartmontools: Control and monitor storage systems using the S.M.A.R.T system1

The smartmontools package contains two utility programs (smartctl and smartd) to control and monitor storage systems using the Self-Monitoring, Analysis and Reporting Technology System (S.M.A.R.T.) built into most modern ATA and SCSI hard disks. It is derived from the smartsuite package, and includes support for ATA/ATAPI-5 disks. It should run on any modern Linux system.

... part of T2, get it here

URL: http://smartmontools.sourceforge.net/

Author: Bruce Allen <smartmontools-support [at] lists [dot] sourceforge [dot] net>
Maintainer: Rene Rebe <rene [at] t2-project [dot] org>

License: GPL
Status: Stable
Version: 7.4

Remark: Does cross compile (as setup and patched in T2).

Download: https://sourceforge.net/projects/smartmontools/files/smartmontools/7.4/ smartmontools-7.4.tar.gz

T2 source: hotfix-samsung.patch
T2 source: smartd.init
T2 source: smartmontools.cache
T2 source: smartmontools.desc

Build time (on reference hardware): 6% (relative to binutils)2

Installed size (on reference hardware): 2.55 MB, 39 files

Dependencies (build time detected): 00-dirtree bash binutils coreutils diffutils findutils gawk grep gzip linux-header m4 make patch sed tar

Installed files (on reference hardware): [show]

1) This page was automatically generated from the T2 package source. Corrections, such as dead links, URL changes or typos need to be performed directly on that source.

2) Compatible with Linux From Scratch's "Standard Build Unit" (SBU).