--- Log opened Mon Jan 30 00:00:51 2006 00:46 < CIA-7> jsaw * r15130 /trunk/package/network/avahi/ (. avahi-daemon.init avahi-dnsconfd.init avahi.desc): 00:46 < CIA-7> * add avahi 0.6.5 (A Zeroconf mDNS/DNS-SD responder) 00:46 < CIA-7> (needed by ekiga) 01:06 < mnemoc> o_O 01:06 < jsaw> ? 01:06 < mnemoc> i didn't expect that kind of dependencies 01:07 < jsaw> hmm, doesn't sound too unnatural 01:07 < jsaw> to me 01:13 < jsaw> mnemoc: it's actually optional 01:13 < jsaw> damn, just found out... 01:13 < jsaw> anyway... let's get full functionality 01:16 < mnemoc> :) 01:16 < jsaw> hmmm, plugin digital camera doesn't create /dev/sda* devices 01:19 < jsaw> plugging* 01:22 < jsaw> mnemoc: apropos ooo, wanna add http://bibus-biblio.sourceforge.net/ ? 01:24 < CIA-7> jsaw * r15131 /trunk/package/network/opal/ (. opal.desc): 01:24 < CIA-7> * move opal (Open Phone Abstraction Layer 2.1.2 beta) 01:24 < CIA-7> out of ekiga 01:26 < CIA-7> jsaw * r15132 /trunk/package/multimedia/ekiga/ (ekiga.conf ekiga.desc): 01:26 < CIA-7> * remove opal sources (see r15131) 01:26 < CIA-7> * enable dbus if available 01:26 < CIA-7> * disable avahi if not available 01:31 < jsaw> *gah* 01:32 < jsaw> some programmers seem to think that the distributors exist only to fix their broken build trees 01:39 < jsaw> mnemoc: ping 01:40 < jsaw> mnemoc: look here: http://www.pybliographer.org/help/recode 01:40 < jsaw> mnemoc: should I add the patch for recode? 01:41 < jsaw> oh 01:41 < jsaw> oh 01:41 < jsaw> oh 01:42 < jsaw> done already since ages: svn log package/base/recode/recode-3.6.patch 01:42 < jsaw> r1911 | rene | 2003-12-04 23:28:43 +0100 (Thu, 04 Dec 2003) | 3 lines 01:42 < jsaw> by myself... 01:44 < CIA-7> jsaw * r15133 /trunk/package/multimedia/ekiga/ekiga.conf: 01:44 < CIA-7> * sorry for another fix, committed too fast: 01:44 < CIA-7> comment out dbus support, as it breaks the build 01:44 < CIA-7> (but now ekiga builds fine!) 01:44 < jsaw> har har 01:45 < jsaw> rpm package installs its own beecrypt 01:46 < mnemoc> :) 01:47 < jsaw> how f* stupid 01:47 < jsaw> and not even a configure option to suppress it 01:48 < mnemoc> o_O 01:48 < jsaw> it simply goes to subdir "beecrypt" and runs "make install"... 01:48 < jsaw> oh my 01:49 < mnemoc> SUBDIRS=beecrypt ? 01:49 < jsaw> yep 01:51 < jsaw> jsaw shoots rpm developers: rpm 4.2*, sources only provided in rpm format 01:52 < mnemoc> o_O 01:52 < jsaw> does our build system handle rpms ? 01:54 < mnemoc> no 01:57 < CIA-7> jsaw * r15134 /trunk/package/security/beecrypt/beecrypt.desc: * move beecrypt prio before rpm 02:03 < CIA-7> amery * r15135 /trunk/package/multimedia/sn9c102/ (5 files): * added sn9c102 (1.26) - SN9C10x PC Camera Controllers 02:10 < jsaw> contents of rpm-4.2-1.src.rpm: 02:10 < jsaw> rpm-4.2.tar.gz 02:10 < jsaw> rpm.spec 02:11 < jsaw> *GAAAAAAAAAAAAAAAHHHHHHHHHHHHHHHHHHHH* 02:11 < jsaw> ldd /bin/rpm 02:11 < jsaw> not a dynamic executable 02:12 < jsaw> they do not even require beecrypt to be installed 02:13 < CIA-7> jsaw * r15136 /trunk/package/archiver/rpm/ (9 files): 02:13 < CIA-7> * do not install beecrypt files 02:13 < CIA-7> * copyright update 02:14 < mnemoc> :) 02:15 -!- sparc-kl1 [n=sparc-kl@64.237.245.32] has quit [Read error: 110 (Connection timed out)] 02:39 < CIA-7> jsaw * r15137 /trunk/package/audio/xmms-nas/xmms-nas.desc: * AUTOMAKE-QUIRK needed 02:42 < jsaw> oh 02:43 < jsaw> http://www.spiegel.de/wissenschaft/erde/0,1518,grossbild-569576-398010,00.html 02:49 < CIA-7> jsaw * r15138 /trunk/package/graphic/tetradraw/tetradraw.desc: 02:49 < CIA-7> * fix for 64bit machines 02:49 < CIA-7> * used wide-char support of ncurses 02:53 < jsaw> if they really release solaris under GPLv3, will we have t2 with solaris kernel...? 04:29 -!- menomc [n=amery@200.75.27.81] has joined #t2 04:30 -!- mnemoc [n=amery@200.75.27.27] has quit [Nick collision from services.] 04:32 -!- menomc is now known as mnemoc 05:24 -!- raamcm [n=raamcm@59.145.141.50] has joined #t2 07:19 -!- rxr_ [n=rene@e178155145.adsl.alicedsl.de] has joined #t2 07:19 -!- Topic for #t2: T2 | 2.1.1.1 and 2.2.0-epsilon RELEASED! | The System Development Environment (SDE) | http://www.t2-project.org/ | Say hello and do not hesitate to ask us any questions that you may have. | http://www.rafb.net/paste/ 07:19 -!- Topic set by mnemoc [] [Sat Jan 14 21:42:03 2006] 07:19 [Users #t2] 07:19 [@ChanServ ] [ jsaw ] [ mnemoc] [ owl ] [ rxr_ ] [ _Ragnar_] 07:19 [ Baldzius_] [ karasz] [ morfoh] [ raamcm] [ sepp_ ] 07:19 [ CIA-7 ] [ LMJ ] [ mtr ] [ rxr ] [ valentin] 07:19 -!- Irssi: #t2: Total of 16 nicks [1 ops, 0 halfops, 0 voices, 15 normal] 07:19 -!- [freenode-info] if you're at a conference and other people are having trouble connecting, please mention it to staff: http://freenode.net/faq.shtml#gettinghelp 07:19 -!- Channel #t2 created Sun Aug 8 19:15:33 2004 07:20 -!- Irssi: Join to #t2 was synced in 42 secs 07:21 < raamcm> Hi rxr 07:35 -!- rxr [n=rene@e178176107.adsl.alicedsl.de] has quit [Read error: 110 (Connection timed out)] 08:05 -!- sherniux [n=ss@81-7-79-120.ip.takas.lt] has joined #t2 08:05 < sherniux> Baldzius_ esi? 08:14 < rxr_> re 08:14 -!- You're now known as rxr 08:14 < rxr> hi raamcm and sherniux 08:18 < rxr> In total, more than one thousand Wikipedia edits in various articles have been traced back to congressional staffers at the U.S. House of Representatives in the past six months. 08:56 < valentin> moin 09:02 < rxr> moin valentin 09:06 < valentin> hi rxr, how are you ? 09:10 < rxr> this damned USB 2 version of Adaptecs USB<->SCSI cable is not responding as demanded 09:10 < rxr> aside from that fine 09:14 < rxr> and you ? 09:15 < valentin> a bit sleepy but fine, thx 09:15 < valentin> think it is time for a breakfast now 09:21 -!- sherniux [n=ss@81-7-79-120.ip.takas.lt] has quit [Read error: 104 (Connection reset by peer)] 09:24 [Users #t2] 09:24 [@ChanServ ] [ jsaw ] [ mnemoc] [ owl ] [ sepp_ ] 09:24 [ Baldzius_] [ karasz] [ morfoh] [ raamcm] [ valentin] 09:24 [ CIA-7 ] [ LMJ ] [ mtr ] [ rxr ] [ _Ragnar_] 09:24 -!- Irssi: #t2: Total of 15 nicks [1 ops, 0 halfops, 0 voices, 14 normal] 09:32 -!- sherniux [n=ss@81-7-79-120.ip.takas.lt] has joined #t2 09:32 < LMJ> morning 09:43 -!- sepp_ [n=sepp@p213.54.137.102.tisdip.tiscali.de] has quit [Read error: 110 (Connection timed out)] 09:46 < raamcm> Hi rxr, how are you 09:46 -!- sepp [n=sepp@p213.54.51.35.tisdip.tiscali.de] has joined #t2 09:48 < LMJ> hello sepp ;) 09:59 < rxr> raamcm: thanks, fine and you? 09:59 < rxr> moin LMJ 09:59 < rxr> hm 09:59 < LMJ> moin rxr 09:59 < rxr> with a SCSI device with ID 0 on the Adaptec USB cable it works 09:59 < rxr> damn 09:59 < rxr> maybe if would have worked since months and the linux code is just giving up to early if there is no device with a low ID 09:59 < rxr> damned 10:25 < rxr> after days of device hacking this office (not only the desk) already looks like a bomb drop ... 10:25 < rxr> damned - guess I have tó spend a hour today sorting all the bits and pieces ... 10:39 < karasz> moin all 10:41 < rxr> moin karasz 10:42 < karasz> hi rxr 10:42 * rxr back in some minutes 10:42 < karasz> i'd like to setup an automount for my USB devices 10:42 < karasz> is there anything that i must configure in KDE? 10:58 < rxr> re 10:58 < rxr> karasz: 2.1 or trunk ? 11:04 < karasz> 2.1 11:04 < karasz> x86-64 11:06 < karasz> be back in 15 mins to discuss that 11:06 < karasz> oki? 11:08 -!- sherniux [n=ss@81-7-79-120.ip.takas.lt] has quit [Read error: 104 (Connection reset by peer)] 11:09 < rxr> karasz: sure 11:09 < rxr> karasz: hm - on trunk u/dev and hal would do that nicely 11:09 < rxr> karasz: on 2.1 you should use some classic automount mechanism - but I have not tried them for years 11:09 < rxr> karasz: maybe mnemoc has more automount experience on 2.1 11:10 -!- sparc-kly [n=sparc-kl@64.237.247.68] has joined #t2 11:13 < rxr> reiser4 performance is really superb ... 11:13 < rxr> http://www.road-gmbh.de/produkte/index_01.html 11:13 < rxr> ^- this company is literaly just some streets away from here 11:13 < rxr> wonders if this is vapo-ware or a real thing 11:28 -!- mtr_ [n=Michael@p54AFA98F.dip0.t-ipconnect.de] has joined #t2 11:37 -!- Baldzius_ is now known as Baldzius 11:38 < Baldzius> good morning 11:43 -!- mtr [n=Michael@p54AFB1C9.dip0.t-ipconnect.de] has quit [Read error: 110 (Connection timed out)] 11:49 < rxr> moin Baldzius 11:50 * rxr booting into a less verbosly instrumented kernel 11:50 < rxr> cu soon 11:59 < rxr> re 12:06 < Baldzius> moin rxr 12:07 < rxr> perl-5.9.3 ??? 12:07 < rxr> ooo-build-2.0.1.2 12:07 -!- sparc-kly [n=sparc-kl@64.237.247.68] has quit [Read error: 110 (Connection timed out)] 12:29 -!- sherniux [n=ss@81-7-79-120.ip.takas.lt] has joined #t2 12:29 < Baldzius> bratka i n.akmene 12:29 -!- sherniux [n=ss@81-7-79-120.ip.takas.lt] has quit [] 12:30 < karasz> i cannot find mnemosyne target on 2.1 config .... 12:30 < Baldzius> hi karasz 12:30 < karasz> hello Baldzius 12:31 -!- sherniux [n=ss@81-7-79-120.ip.takas.lt] has joined #t2 12:31 < Baldzius> karasz: i have one Arina song - Moonlight song 12:31 < sherniux> Baldzius atsikelei? 12:31 < Baldzius> bratka i n.akmene 12:35 < karasz> Baldzius: :) 12:36 < karasz> i cannot find mnemosyne target on 2.1 config ....?!? 12:36 < Baldzius> you want it? 12:36 < karasz> yup 12:36 < karasz> if you can... 12:36 < Baldzius> karasz: ok, later this evening 12:36 < karasz> np 12:36 < karasz> thanks in advance 12:37 < Baldzius> i can get album but she sings in lithuanian 12:37 < karasz> np 12:37 < karasz> lituanian is ok 12:37 < Baldzius> interested ---^ ? 12:37 < karasz> ofcourse 12:37 < Baldzius> :) 12:37 < karasz> it will broaden my language horizons... :) 12:38 < Baldzius> ok i'll donwload it 12:38 < karasz> if it is not a trouble for you. 12:38 < Baldzius> no :) 12:43 < karasz> hmm mnemosyne is 2.0 related?? 12:43 < karasz> i mean 2.2 12:44 -!- sparc-kly [n=sparc-kl@64.237.247.68] has joined #t2 12:44 < Baldzius> i don't know 12:45 < morfoh> tovorish karasz, mnemosyne was removed from the official 2.1 tree afaik 12:45 < karasz> spasiba kommrad morfoh 12:45 < karasz> but why? 12:45 < morfoh> karasz: I think the target got an own "home" 12:45 < rxr> karasz: maintained off site ? 12:46 < karasz> rxr? 12:46 < rxr> karasz: but I think mnemosyne is stable with 2.1 and not regularly tested with 2.1, so it is intended to work and be stable with 2.1 ... 12:46 < rxr> karasz: svn.exactcode.de/mnemosyne or so ... 12:46 < morfoh> karasz: yeah it's stable 12:46 < rxr> karasz: but I do not knwo more details it is morfoh pet ... 12:47 < morfoh> rxr: you meant mnemoc's pet ;) 12:47 < morfoh> karasz: but I can help you to get it 12:47 < rxr> morfoh: yeah ... 12:48 < rxr> morfoh: stupid auto completion ... ,-) 12:48 * rxr slaps irssi ... 12:48 < karasz> so i should try with my 2.1 and a svn ... 12:48 < karasz> or go to the trunk? 12:48 < morfoh> rxr: don't slap irssi ... I like mnemosyne too ;) 12:48 < owl> moin 12:49 < morfoh> karasz: first change into your 2.1 t2 base dir 12:49 < karasz> yup 12:49 < morfoh> svn pedit svn:externals target/ 12:49 < morfoh> then an editor window is opening 12:49 < morfoh> right ? 12:50 < karasz> yup 12:50 < karasz> vi in fact 12:50 < morfoh> insert following -> mnemosyne http://svn.exactcode.de/mnemosyne/mnemosyne/trunk 12:50 < karasz> done 12:51 < morfoh> mnemosyne http://svn.exactcode.de/mnemosyne/mnemosyne/trunk 12:51 < morfoh> ^^ that's the right syntax 12:51 < rxr> hm 12:51 < rxr> bummer 12:51 < rxr> damn usb-scsi cable f*ck up my usb ports now .. 12:51 < rxr> needs reboot soon 12:51 < rxr> damn that I have a ssh with a long-time job runnign - sigh 12:51 < morfoh> karasz: save the content 12:52 < morfoh> karasz: now you can "svn up" and it will fetch mnemosyne 12:52 < karasz> from my point of vierw they look the same 12:54 < morfoh> karasz: of course it's the same ... I just wanted to show you the bare line. ;) 12:54 < karasz> :) 12:54 < karasz> thatr much i know already that `insert following ->` is not part of the syntax, but thanks anyway 12:54 < karasz> mnemosyte here i come... 12:55 < morfoh> karasz: I just wanted to asure that you are going to use the right syntax on a monday :p 12:55 < karasz> monday? 12:55 < karasz> i didn't even noticed that 12:57 -!- sherniux [n=ss@81-7-79-120.ip.takas.lt] has quit [Read error: 104 (Connection reset by peer)] 12:58 < karasz> hmm --Network --Comunication [] Director? 12:58 < karasz> what is that? 12:58 < rxr> re 12:59 < morfoh> karasz: ipvs (Loadbalancing) 12:59 < karasz> ahum, so i do not need it... 13:05 < rxr> 7 files changed, 311 insertions(+) 13:05 < rxr> adaptec-usbxchange nears to be send upstream 13:12 < mnemoc> moin 13:12 < rxr> moin mnemoc 13:12 < mnemoc> moin moin rxr 13:12 < karasz> moin mnemoc 13:12 < morfoh> moin mnemoc 13:13 < mnemoc> hi karasz, morfoh 13:14 < mnemoc> yuck, mkinitrd needs disktype :\ 13:22 < rxr> mnemoc: yes, for smart rootfs type detection 13:22 < rxr> it does fallback to try any availble - but this results in many ugly "superblock not found whatsoever" kernel messages 13:23 < morfoh> mnemoc: good luck with mnemosyne on trunk ;) 13:24 < morfoh> mnemoc: as we discussed some days before, you'll need some more additional packages on 2.2 for building mnemosyne 13:24 < mnemoc> i'm building a minimal mnemosyne for now 13:25 < morfoh> rxr: where do we have a copy of the T2 logo as .svg ? 13:26 < rxr> morfoh: no idea 13:26 < rxr> morfoh: some personal webspace or some HD, somewhere 13:26 < rxr> but this logo will be wiped before the CeBIT anyway 13:27 < mnemoc> any ideas in mind? 13:27 < rxr> worst case it is already lost on the shred HD of my iBook that went ebay 13:27 < morfoh> rxr: do we'll change the colors ? 13:27 < rxr> mnemoc: nope - unfortunatly most logo work is mostly ignored due to fun of coding instead 13:27 < rxr> mnemoc: most probably something with Madedas "simplicity" in mind 13:27 < rxr> Maeda's ... 13:28 < rxr> something without animals, slick and simple 13:29 < mnemoc> just T^2 ? 13:29 < mnemoc> or T_2 ? 13:30 < karasz> morfoh: ping 13:30 < morfoh> mnemoc: I'd prefer a simple and clean logo too ... instead of trying to find an obscure mascot :) 13:30 < mnemoc> :) 13:31 < karasz> morfoh: is it sane that i am injecting mnemosyne trunk into 2.1 stable tree? 13:31 < mnemoc> karasz: mnemosyne is only tested on 2.1 currently :p 13:31 < karasz> oki 13:31 < morfoh> karasz: answered :) 13:33 < mnemoc> but damn sn9c102 driver only works on linux "2.6.15-git6 or greater" so i have to port azazel to T2 2.2 asap 13:33 < morfoh> rxr: do you want to reuse the "nice" green color from the current logo for the new one ? 13:34 < rxr> morfoh: open - maybe not 13:35 < mnemoc> i prefer blue 13:35 < mnemoc> and gray :p 13:35 < rxr> mnemoc: ack - me too 13:36 < mnemoc> morfoh: propose something for the page, and we adapt the logo and 'merchandising' after that :) 13:39 < morfoh> mnemoc: because you said that the logo will not be changed ... I tried to use the current colors for the new T2PloneSkin :p 13:41 < mnemoc> morfoh: i didn't say it wont be changed, i said that it's _the_ current logo 13:43 < morfoh> mnemoc: what do you prefer more, the default 3 column plone look and feel or a bit more cleaner 2 columns version ? 13:43 < morfoh> mnemoc: I know ... I'll not bother you with it anymore :p 13:45 < mnemoc> i prefer 2 columns 13:45 < morfoh> me too 13:48 < mnemoc> morfoh: i would merge contact and support on top bar menu, in pro of 'packages' 13:49 < mnemoc> morfoh: and remove the calendar in favor of the last news 13:50 < morfoh> mnemoc: yes ... the calendar will be removed, but anyway the news portlet is yet activated on the right 13:50 < morfoh> but it's empty :p 13:50 < raamcm> Hi rxr 14:13 -!- raamcm [n=raamcm@59.145.141.50] has quit ["Leaving"] 14:15 -!- raamcm [n=raamcm@59.145.141.50] has joined #t2 14:18 < raamcm> Hi rxr 14:19 < raamcm> hi i have onemore problem 14:32 < raamcm> i am got erre 14:32 < raamcm> error 14:32 < raamcm> Not a valid build: bootdisc 14:32 < raamcm> wht this 14:39 < raamcm> anybody there 14:50 < rxr> re 14:51 < raamcm> Hi RXR 14:53 < rxr> hi 14:53 < raamcm> wht's my problem 14:53 < raamcm> Not a valid build: bootdisc 14:55 < rxr> raamcm: what did you try ? 14:59 < raamcm> i gave all comments same time in via shell script 15:00 < raamcm> finally i got this error 15:00 < mnemoc> ls -1 config/ 15:00 < raamcm> i don't know exactly where this error found 15:01 < mnemoc> Build-Target probably 15:01 < mnemoc> ls -1 config/ 15:01 < raamcm> ok 15:02 < raamcm> it's showing three directory 15:03 < raamcm> bootdisc;default;system 15:03 < mnemoc> there is a 'bootdisc' there ? 15:03 < raamcm> yeah 15:03 < mnemoc> ls config/bootdisc/ 15:04 < raamcm> instead 2 files 15:04 < raamcm> config abd packages 15:04 < mnemoc> uhm 15:04 < raamcm> sorry config and packages 15:05 < mnemoc> what t2 tree are you using? 15:05 < raamcm> t2-2.1.1.1 15:05 < mnemoc> ok 15:06 < mnemoc> Config -cfg bootdisc -oldconfig <--- and http://www.rafb.net/paste/ the output please 15:06 < raamcm> ok 15:09 < raamcm> http://www.rafb.net/paste/results/AyGPji94.html 15:10 < mnemoc> looks good 15:10 < raamcm> can i use pastebin.com 15:10 < mnemoc> free world 15:10 < raamcm> ok tellme wht should i do 15:11 < raamcm> hmm 15:11 < raamcm> i am now sleepy mood 15:11 < mnemoc> Download -cfg bootdisc -required ? 15:12 < raamcm> this is one i give 15:13 < raamcm> oh shit i got again error 15:13 < raamcm> http://www.rafb.net/paste/results/8ugIqU57.html 15:14 < raamcm> plz check it 15:14 < raamcm> :-( 15:14 < CIA-7> rene * r15139 /trunk/package/base/linux26/adaptec-usbxchange.patch: * added support for the Adaptec USB*Xchange family of USB<->SCSI cables 15:15 < mnemoc> raamcm: rm download/Mirror 15:16 < raamcm> yeah i did 15:16 < raamcm> how mach time this take 15:17 < raamcm> i am sleepy mood now 15:17 < mnemoc> what mirror did it choose? 15:17 < raamcm> INFO: Using mirror 15:17 < CIA-7> rene * r15140 /trunk/target/archivista/pkgsel: * added the adaptec-usbxchange firmware to the archivista target 15:18 < raamcm> tell me mnemoc 15:19 < rxr> mnemoc: do you have mirror infrastructure for the long 2.1.1.1 version ? 15:21 < sepp> moin 15:21 < mnemoc> rxr: yes 15:21 < rxr> o 15:21 < rxr> k 15:21 < mnemoc> rxr: lot of hardlinks but yes 15:21 < raamcm> yeah thaT'S DOWNLOADED 15:21 < raamcm> oh capslock on 15:22 < raamcm> sorry 15:22 < raamcm> wht i do now 15:23 < mnemoc> rxr: http://www.rafb.net/paste/results/VmxUde64.html 15:23 < mnemoc> raamcm: Download again, until everything is downloaded 15:23 < mnemoc> raamcm: and then, Build-Target -cfg bootdisc 15:24 < morfoh> h*ll my connection is lagging :( 15:24 < morfoh> hi sepp :) 15:24 < sepp> raamcm: but if bootdisc downloads e17 there is something wrong 15:24 < sepp> hi morfoh 15:24 < raamcm> wrong 15:25 < mnemoc> did you set 'bootdisc's target? 15:25 < raamcm> yeah 15:25 < mnemoc> grep TARGET config/bootdisc/config 15:25 < mnemoc> grep '^X' config/bootdisc/packages | wc -l 15:26 < raamcm> export SDECFG_TARGET='generic' 15:26 < mnemoc> so you didn't 15:26 < raamcm> 97 15:26 < rxr> l 15:26 < mnemoc> and you set 'crosscompile' 15:27 < mnemoc> but why e17? .oO 15:27 < raamcm> no i did't set 15:28 < raamcm> ok tell me exact remedy plz 15:28 < mnemoc> rm -rf config/bootdisc 15:28 < raamcm> i am now very pethetic situation 15:28 < raamcm> ok i did 15:28 < mnemoc> Config -cfg bootdisc 15:29 < mnemoc> set architecture, optimization and target.... then exit 15:29 < raamcm> yeah i did 15:30 < mnemoc> grep '^X' config/bootdisc/packages | wc -l 15:30 < mnemoc> grep TARGET config/bootdisc/config 15:31 < raamcm> http://www.rafb.net/paste/results/Rds5Ia77.html 15:31 < raamcm> i paste it 15:32 < mnemoc> how did you 'exit' Config ? 15:32 < raamcm> yeah 15:32 < mnemoc> yeah? 15:33 < raamcm> i am not select in arch 15:34 < raamcm> but i select only generic system and minimal packages 15:34 < raamcm> thats it 15:35 < raamcm> :-( 15:36 < raamcm> i got toomuch tired 15:36 < raamcm> plz tellme 15:36 < mnemoc> 1) why do you name 'bootdisc' a generic/minimal? 2) how did you exit Config? ctrl-c? 3) grep ARCH config/bootdisc/config 15:39 < raamcm> export SDECFG_ARCH='x86' 15:40 < raamcm> can i give again that same comment 15:41 -!- morfoh [n=jeru@p54BECAF6.dip.t-dialin.net] has quit [Nick collision from services.] 15:41 < raamcm> sorry commanr 15:41 < raamcm> sorry commant 15:42 -!- morfoh [n=jeru@p54BEDD53.dip.t-dialin.net] has joined #t2 15:42 < raamcm> really very sorry some junk input 15:42 < raamcm> tell me mnemoc 15:44 < raamcm> ok i am now leaving 15:44 < morfoh> f* disconnect, first they are robbing all the bandwidth with senseless p2p traffic and then they reset the router ... :-/ 15:44 < raamcm> plz put some further step 15:45 < raamcm> :-/ 15:45 < raamcm> :-\ 15:45 < raamcm> :-( 15:46 < raamcm> :( 15:46 < raamcm> :-( 15:46 < raamcm> ok bye now 15:48 < mnemoc> raamcm: you are doing something weird inside Config i don't understand 15:55 < CIA-7> rene * r15141 /trunk/package/base/ (2 files in 2 dirs): 15:55 < CIA-7> * copied the linux26mm based adaptec-usbxchange patch into linux26mm 15:55 < CIA-7> and rediffed it to apply against vanilla linux26 15:56 < rxr> morfoh: they == your living community ? 16:17 -!- misl [n=chatzill@82-217-66-150.cable.quicknet.nl] has joined #t2 16:28 -!- rxr_ [n=rene@e178169246.adsl.alicedsl.de] has joined #t2 16:28 -!- Topic for #t2: T2 | 2.1.1.1 and 2.2.0-epsilon RELEASED! | The System Development Environment (SDE) | http://www.t2-project.org/ | Say hello and do not hesitate to ask us any questions that you may have. | http://www.rafb.net/paste/ 16:28 -!- Topic set by mnemoc [] [Sat Jan 14 21:42:03 2006] 16:28 [Users #t2] 16:28 [@ChanServ] [ jsaw ] [ misl ] [ mtr_ ] [ rxr ] [ sparc-kly] 16:28 [ Baldzius] [ karasz] [ mnemoc] [ owl ] [ rxr_] [ valentin ] 16:28 [ CIA-7 ] [ LMJ ] [ morfoh] [ raamcm] [ sepp] [ _Ragnar_ ] 16:28 -!- Irssi: #t2: Total of 18 nicks [1 ops, 0 halfops, 0 voices, 17 normal] 16:28 -!- [freenode-info] if you need to send private messages, please register: http://freenode.net/faq.shtml#privmsg 16:28 -!- Channel #t2 created Sun Aug 8 19:15:33 2004 16:28 -!- Irssi: Join to #t2 was synced in 42 secs 16:37 < morfoh> hi moped missile :) 16:41 < morfoh> already helped my windooze p2p friend to get a network connection again ... what I really shouldn't had done ... again lagging :( 16:42 -!- rxr [n=rene@e178155145.adsl.alicedsl.de] has quit [Read error: 110 (Connection timed out)] 16:43 < morfoh> I can drink a coffee during the delay of displaying 2 characters in a ssh 16:46 < karasz> that is harsh kommrad... 16:47 < morfoh> that's pain tovorish karasz 16:47 < sepp> i suggest level1 hardware - my box always resets if >2 users run wireless p2p 16:48 < morfoh> sepp: it's a netgear dsl router crap box 16:56 < morfoh> .oO( that's no fun! :((( )o 17:06 < misl> Error logs from ref64-2.1-test-x86-64-generic: 17:06 < misl> [1] base/linux26 [1] base/linux24 17:06 < misl> [5] base/linux24 [5] games/bsd-games 17:06 < misl> [5] graphic/transfig [5] network/ettercap 17:06 < misl> [5] develop/mono [5] network/chrony 17:06 < misl> [5] x11/ddcxinfo [5] www/w3m 17:06 < misl> [5] contrib/directfb [5] network/gsmlib 17:06 < misl> [5] filesystem/siefs [5] emulators/gens 17:06 < misl> [5] textproc/xmlstarlet 17:06 < misl> 1650 builds total, 659 completed fine, 15 with errors. 17:26 < rxr_> hi misl 17:27 -!- You're now known as rxr 17:30 < mnemoc> rehi 17:31 < morfoh> wb mnemoc 17:31 < mnemoc> misl: what is breaking linux{24,26}? 17:43 < mnemoc> funny... wine IEXPLORER.EXE starts in half the time i need to start firefox 17:44 < sparc-kly> O_0 17:47 < LMJ> moin moin 17:49 < mnemoc> moin LMJ 17:50 < LMJ> how are you mnemoc ? 17:50 < mnemoc> stunned :\ to much heat 17:51 < rxr> yeaaaaaaaaaahhhhhhhhhhhhhhhh!!!!!!!!!! 17:51 < rxr> root@localhost:/media# cat /proc/scsi/scsi 17:51 < rxr> Attached devices: 17:51 < rxr> Host: scsi16 Channel: 00 Id: 05 Lun: 00 17:51 < rxr> Vendor: IOMEGA Model: ZIP 250 Rev: H.41 17:51 < rxr> Type: Direct-Access ANSI SCSI revision: 02 17:51 < rxr> multi target support working on teh USB2Xchange - finally ... 17:53 < misl> sorry mnemoc: I was having dinner 17:53 < misl> I will look what caused linux{24,26} problems 17:55 < misl> linux26 in stage1: --> os-interface.c:1262: error: structure has no member named `rlim' 17:56 < misl> linux24 in stage1: 17:56 < misl> x86_64-t2-linux-gnu-kcc -march=i586 -O2 -Wall -Wstrict-prototypes -pipe -fno-str 17:56 < misl> ict-aliasing -fno-common -DMODULE -D__KERNEL__ -DLINUX -I/mnt/space/t2/2.1-test 17:56 < misl> /src.linux24.ref64.20060130.081418.25867.noisy/linux-2.4.31/include -c km.c 17:56 < misl> km.c:1: error: CPU you selected does not support x86-64 instruction set 17:56 < LMJ> 4°C here ;) 17:56 < misl> km.c:1: error: CPU you selected does not support x86-64 instruction set 17:56 < misl> make: *** [km.o] Error 1 17:56 < misl> o_O 17:57 < misl> linux24 in stage 5 has the same problem 17:57 < misl> kcc -march=i586 -O2 -Wall -Wstrict-prototypes -pipe -fno-strict-aliasing -fno-co 17:57 < misl> mmon -DMODULE -D__KERNEL__ -DLINUX -I/TOOLCHAIN/src.linux24.ref64.20060130.0822 17:57 < misl> 10.4242.noisy/linux-2.4.31/include -c km.c 17:57 < misl> km.c:1: error: CPU you selected does not support x86-64 instruction set 17:57 < misl> km.c:1: error: CPU you selected does not support x86-64 instruction set 17:57 < misl> make: *** [km.o] Error 1 17:58 < mnemoc> o_o 18:00 < misl> I guess this is due too noisy not being fully 64bits 18:00 < misl> cross-building for x86-64 does work 18:00 < misl> that's why I tried to crossbuild for x86-64 18:01 < mnemoc> misl: cross-building doesn't include extra modules 18:01 < misl> ahh 18:01 < mnemoc> misl: native build does 18:01 < mnemoc> misl: don't blame poor noisy for not been pure 18:01 < misl> :) 18:01 < misl> okay I blame you instead :D 18:02 < mnemoc> :) 18:16 -!- Bart- [n=bart@osiris.osk.enformatic.pl] has joined #t2 18:17 < Bart-> moin * 18:17 < Bart-> what encoding is preferred in *.desc files? 18:18 < karasz> moin Bart- 18:18 < mnemoc> iso8859-1 i guess 18:18 < mnemoc> rxr: what encoding is preferred in *.desc files? 18:19 < rxr> utf-8 18:19 < rxr> mnemoc: utf-8 rules the world 18:20 < mnemoc> :) 18:20 < karasz> mnemoc: I followed your advice :) 18:20 < karasz> I am buildin mnemosyne for my webserver 18:20 < mnemoc> karasz: and? 18:22 < Bart-> as I thought ;] why *.desktop files are missing in Firefox and mrxvt? I'd like to generate menus using *.desktops - so I'll like to add them for myself anyway 18:24 < mnemoc> Bart-: add a .desktop file at package/*/firefox and package/*/mrxvt 18:26 < Bart-> mnemoc, sure, but I don't know how, as a patch or a file added in some mistical way? 18:27 < karasz> mnemoc: nothin, just buildin 18:27 < karasz> it is a PIII so it will take a while 18:27 < Bart-> and I know at most two languages so others should patch it if they want localized menus ;] 18:27 < mnemoc> Bart-: everything you send to t2@t2-project.org should be diff -u from t2-root 18:27 < mnemoc> Bart-: *.desktop files, just copy them to $confdir (package/$repo/$pkg) can generate the diff 18:28 < Bart-> oops, I wanted to say "hello ML" in normal way ;] but ok, I'll send a diff -u ;] 18:30 < Bart-> ok, mnemoc most importand question now and I'm gonna be quiet: I'm trying to build a package which has oly Makefile but *without* "install" target and it breaks when invoking "make install" 18:31 < CIA-7> msluis * r15142 /branches/2.1-test/package/multimedia/libmpeg2/libmpeg2.desc: * merged 14847 from trunk branch: libmpeg2 misses -fPIC, added FPIC-QUIRK 18:31 < Bart-> should I add "install" rule to Makefile using patch or ypu do this in some other way? 18:32 < mnemoc> Bart-: makeinstopt= disable `make install`, and you can install using postmake hook 18:33 < Bart-> mnemoc, thx, I'll grep packages first to see how it is done ;] 18:33 < mnemoc> :) 18:33 < Bart-> me\ -q 18:33 < CIA-7> msluis * r15143 /branches/2.1-test/package/archiver/lzo/lzo.desc: * merged 14839 from trunk: marked lzo FPIC-QUIRK, as needed (x86-64) 18:34 < CIA-7> msluis * r15144 /branches/2.1-test/package/mail/maildrop/maildrop.desc: * merged 14693 from trunk: maildrop needs FPIC-QUIRK 18:40 < mnemoc> Bart-: subscription mails are sent to lists@t2-project.org, not to the list itself 18:41 < valentin> hi 18:42 < valentin> Bart-: i can subscribe you manualy if you wish 18:43 < valentin> oh, you are already 18:45 < CIA-7> rene * r15145 /trunk/package/base/ (2 files in 2 dirs): * added multi target quirks to the Adaptec USB2Xchange support patch 18:45 < rxr> so - that should have been the USB2Xchange work - hopefully, finally 18:45 < Bart-> I found only one address on website and subscribed earlier, thought that t2@ is some other list 18:47 < valentin> hi rxr, did you fix the kernel module ? 18:47 < rxr> valentin: I wrote it ,-) 18:47 < Bart-> [S] Stable <- refers to software status or package status? 18:48 < rxr> Bart-: both 18:48 < rxr> Bart-: mostly software 18:48 < valentin> though there is no such thing like "stability" in software ;) 18:49 < mnemoc> i know only two almost-perfect pieces of software 18:49 < valentin> mnemoc: share your secret 18:49 < rxr> but then e.g. a softwae is 0.1 or 0.2 and claims to be alpha or beta and we know it works as expected we mark it Stable non-the-less 18:49 < mnemoc> valentin: vlan and vmailmgr 18:50 < valentin> how about vim ? 18:50 < mnemoc> well... it's usability is not very close to perfection :p 18:50 < rxr> valentin: vim is POS 18:50 < valentin> thinking about an [UF] tag ... 18:51 < valentin> POS ? 18:51 < rxr> piece of shit 18:51 < valentin> hehe 18:51 < rxr> valentin: when you claim it's pefection you oviously only used it with it's basic feature and never looked into the source 18:51 < valentin> i do not claim it is perfect software 18:52 < valentin> don't even use it too much except for console editing 18:52 < rxr> 18:50 < valentin> how about vim ? 18:53 < rxr> sounded like "isn't vim near perfection" ... 18:54 < valentin> did you ever see vim crash ? 18:55 < mnemoc> great point 18:55 < mnemoc> vi /proc/kmem 18:57 < valentin> mnemoc: nasty 18:58 < valentin> but kcore is read only 18:58 < mnemoc> :) 19:00 < rxr> yes, vim's most annoying issue is reading the whole file into memory at open() time ... 19:00 < valentin> yea 19:03 < mnemoc> not if you set it to not count the lines 19:07 < rxr> ouhm 19:08 < valentin> mnemoc: you are right - turning off the ruler information, i can edit a 25GB file... 19:09 < mnemoc> :) 19:11 < valentin> and with rulers on, you can hit controll-c and it will stop loading and go into editing mode 19:23 < sepp> " [... 1146 vertices ...] " and vim with syntax highlight is dead 19:26 < sepp> once i opened a game model in the silly xml format with 10.000 polys and after 10 minutes vim was still "thinking" 19:36 < valentin> Fetching external item into 'source/utility' 19:36 < valentin> Updated external to revision 400. 19:36 < valentin> Fetching external item into 'target/mnemosyne' 19:36 < valentin> Updated external to revision 300. 19:36 < valentin> nice numbers... 19:37 < mnemoc> h:) 19:37 < mnemoc> :) 19:39 < rxr> GTK+ 2.8.11 19:40 < Bart-> how can I disable installing junk like empty COPYING, INSTALL, TODO? what is "createdocs=0" for? 19:43 < rxr> Bart-: you can disable T2's auto-copy with SDECFG_CREATE_DOCS in your Config 19:43 < rxr> though maybe packages still install it's own stuff 19:43 < rxr> you can use INSTALL_FITLER translators to get rid of them generically 19:44 < Bart-> rxr, but it IS disabled till.. ee.. ever 19:45 < Bart-> I'd like to kill autocteation of /usr/doc/package since it should be /usr/share/doc/package-version, is it possible to fix it or disable? 19:47 < mnemoc> patch, or install_wrapper or flistdel 19:48 < Bart-> hey, maybe I can redefine $docdir 19:48 < mnemoc> docdir=whatever 19:48 < Bart-> this should be fixed upstream IMO, not in every package 20:03 < Bart-> still bad, after redefining setting docdir=$docdir-$ver I got 2 docdirs 20:03 < mnemoc> i think you want to use install_wrapper 20:06 < Bart-> actually I just want to "rm -rf" somehow ;] brb 20:08 < rxr> mnemoc: we try to build 2.1 ooo on powerpc - let's see 20:09 < rxr> on the ooo homepage they only have 1.0 binary for powrpc ... 20:09 < rxr> powepc 20:09 < rxr> +r 20:09 < rxr> damned 20:09 < valentin> hm, since when is this supported: [P] X -----X---X 201.300 20:09 < rxr> valentin: maybe not at all ? 20:09 < rxr> better fix it 20:09 < valentin> must be from rock days (because it is my package) 20:09 < rxr> where do you see it ? 20:10 < mnemoc> rxr: try on 2.1-test 20:10 < rxr> mnemoc: ouhm 20:10 < rxr> build started already ... 20:10 < mnemoc> ok :) 20:10 < rxr> mnemoc: test has a newer ooo? 20:10 < valentin> asterisk and ser 20:10 < rxr> mnemoc: also there is a even newer ooo .2 20:10 < rxr> saw it on t2-update 20:10 < mnemoc> rxr: 2.1-stable has 2.0.0.1 (which doesn't save non-M$ formats) 20:10 < rxr> mnemoc: you do not want to test on trunk ? 20:11 < mnemoc> rxr: i'm trying to build an azazel on trunk 20:11 < mnemoc> rxr: == 17:11:48 =[1]=> Building base/ncurses [5.4 2.2.0-alpha]. currently 20:13 < CIA-7> valentin * r15146 /trunk/package/network/ (asterisk/asterisk.desc ser/ser.desc): * fixed malformed [P] tags 20:13 < mnemoc> valentin: svn blame? 20:14 < valentin> mnemoc: why ? i think asterisk was one of my first packages, so i think i created it like that 20:15 < rxr> we off - cu 20:15 < mnemoc> valentin: :) 20:16 < valentin> cu rxr 20:16 < mnemoc> cu rxr, have fun 20:32 < Bart-> now I have 3 docdirs, beautyfull 20:39 < valentin> about half of our cache .deps are still uneeded 20:39 < valentin> and we have many obsoleted dependencys 20:40 < mnemoc> valentin: i can't update as often as i would like due to python miss-depedencies 20:40 < mnemoc> every python package is detected to depend on every other python package 20:40 < valentin> hm, some of my hits are stage 0 ghosts 20:41 < valentin> mnemoc: i do a list and mark every dependcy to X as optional, if Y is build prior to X according to [P] 20:41 < valentin> assuming trunk builds with [P] order, it should give something close to the truth 20:42 < valentin> except for stage 0 packages like tar etc... of course 20:42 < mnemoc> ack 20:42 < valentin> should have thought for stage 0 and filtered them out before ... mom, i'll do 20:43 -!- sepp [n=sepp@p213.54.51.35.tisdip.tiscali.de] has quit ["Lost terminal"] 20:46 < valentin> the optionals this run gives should be a lower bound on the number of "optional tags" we need to sort packages without looking at [P] 20:47 < valentin> over 1000 ... .oO 20:48 -!- sepp [n=sepp@p213.54.51.35.tisdip.tiscali.de] has joined #t2 20:48 < Bart-> mnemoc, can't get what to do with this install_wrapper 20:49 < Bart-> this crap is even harder to use than rpm 20:49 < mnemoc> Bart-: a sed expression to apply to cp and install calls 20:50 < Bart-> but grep doesn't show me any package using this 20:50 < jsaw> re 20:51 < Bart-> can't I simply kill this shitty feature which auto-makes mess in $docdir? I saw packages using createdocs=0 but thos does not work for me 20:51 < sepp> grep INSTALL_WRAPPER_FILTER 20:51 < valentin> mnemoc: many packages have no .cache yet 20:53 < mnemoc> valentin: throw them to the end 20:53 < valentin> mnemoc: i'm searching for "optionals" atm... 20:54 < valentin> by looking at [P] order 20:54 < valentin> once i used the output to break cycles, i can see how packages are reordered when sorted after DEPs 20:55 < valentin> btw, some of that stuff is quite elementary. i think i cannot throw all to the end because other packages dep on it. 20:58 < valentin> mnemoc: 1578 deps pointing "backwards" 20:58 < valentin> and 405 obsoleted deps 20:59 < valentin> not to mention about 50 missing .cache files :/ 20:59 < mnemoc> just 50? 21:00 < valentin> mnemoc: the list fits onto one fullscreen xterm 21:00 < valentin> 73 missing .cashes 21:00 < valentin> caches 21:02 < valentin> mnemoc: most of the backward stuff is basic tools like gawk, bash, sed ... 21:10 < Bart-> INSTALL_WRAPPER_FILTER gives nothing :[ I don't want to modify commands but just delete autogenerated $docdir with its content, f*ck, just rm -rf $docdir 21:12 < mnemoc> valentin: we suppose to use groups for those 21:12 < mnemoc> Bart-: hook_add postdoc 5 'rm -rf $docdir' 21:13 < Bart-> so easy?! can't belive that ;] me\ gome to check this out 21:16 < Bart-> nope, did not rm anything 21:18 < Bart-> well, actally it deleted but *files on disk* 21:19 < valentin> rm -rf $docdir ? isn't that harmfull ? 21:20 < Bart-> can this crappy shit be used from regular user 21:20 < Bart-> 's account? 21:20 < mnemoc> Bart-: you said you want to "rm -rf $docdir" and i told you how 21:20 < mnemoc> $root/$docdir is safer but equaly ugly 21:20 < Bart-> mnemoc, thx, right. Next time try to be helpful, tell me to rm -rf / 21:20 < mnemoc> Bart-: lusers can't chroot 21:23 < Bart-> now I undestand why you have mess in $docdir, you simply cannot control this 21:23 < Bart-> s,$docdir,/usr/share/doc, 21:24 < Bart-> anyone knows how to tell this pig not to auto-install docs when building package? 21:25 < mnemoc> createdocs=0 21:25 < Bart-> i sayd that this do nothing 21:25 < Bart-> said even 21:30 < rxr> re 21:31 < Bart-> some package is ugly built, I have file: /usr/share/doc/sed.html but it should be rather in "sed" directory 21:31 < rxr> valentin: filter out what is needed for build anway, bash, sed, awk, ... 21:32 < mnemoc> rxr: http://www.rafb.net/paste/results/g0ST9N86.html 21:33 < rxr> mnemoc: open a trac issue and assign it to me ,-) 21:33 < rxr> mnemoc: for the python junk 21:33 < mnemoc> rxr: trac what? 21:33 < rxr> trac issue for python dep junk 21:33 < rxr> mnemoc: that change is ok with me 21:34 < rxr> mnemoc: IIRC clifford demanded to copy elementary stuff at 1.7 times 21:34 < rxr> mnemoc: one can most probably find a trace of that in the old list archives if still there 21:34 < rxr> but I ACK your diff 21:34 < mnemoc> rxr: :) 21:34 < rxr> /we sleeping in some minutes 21:35 < rxr> mnemoc: btw. we should detect and complain if the packages make install (or other custom, broken .conf stuff) creates a file aside $docdir 21:35 < rxr> I saw some packages copy simillar stuff what we do automatically in their make install cycle 21:35 < rxr> avrdude is an example IIRC 21:36 < rxr> but I'll sleep now - n8 all 21:36 < Bart-> rxr, could you fix build system to allow disabling docs auto instalation please? 21:36 < mnemoc> gn8 rxr 21:36 < mnemoc> Bart-: i'll do, give me two minutes 21:37 < Bart-> oh, I thought that nobody cares ;] 21:37 < Bart-> besides, ypu must know this bug pretty well to fix it in two minutes ;] 21:37 < CIA-7> amery * r15147 /trunk/scripts/functions.in: * changed createdocs=0 to also omit essential documentation 21:38 < mnemoc> Bart-: svn up 21:41 < Bart-> hey, this works! 21:41 < valentin> rxr: yes, that is obvious. still many remain 21:41 < Bart-> thx mnemoc, createdocs=0 do whot I expect 21:42 < valentin> gn8 all 21:42 < Bart-> gn8 21:42 < mnemoc> gn8 valentin 21:42 < mnemoc> Bart-: :) 21:43 < Bart-> well, 4 hours for package which takes me about 3 minutes while usng RPM... 21:43 < mnemoc> Bart-: i didn't know the bug pretty well, i just know where to look at 21:43 < Bart-> I wanted to save time using automated build but it seems to be impossible ;] 21:44 < mnemoc> Bart-: the first time is always more difficult than the next 21:46 < Bart-> especially when bugs "help", I found createdocs during first 10 minutes 21:47 < mnemoc> it wasn't a bug, it was a design decition 21:47 < mnemoc> which T2's core architect agree to change 21:47 < Bart-> yeah, script was developing random features ;] 21:53 < Bart-> off 21:54 < mnemoc> cu 21:54 < Bart-> cu * 21:54 -!- Bart- [n=bart@osiris.osk.enformatic.pl] has quit ["Who's General Failure and why he's reading my disk?"] 22:21 < CIA-7> aldas * r15148 /trunk/package/gnome2/gtk+/ (5 files): * updated gtk+ (2.8.10 -> 2.8.11) 22:32 < CIA-7> aldas * r15149 /trunk/package/network/asterisk/ (asterisk.conf asterisk.desc): * updated asterisk (1.2.1 -> 1.2.3) 22:39 < CIA-7> aldas * r15150 /trunk/package/security/botan/botan.desc: * updated botan (1.4.11 -> 1.4.12) 22:58 -!- sparc-kl1 [n=sparc-kl@64.237.251.16] has joined #t2 23:06 < CIA-7> aldas * r15151 /trunk/package/graphic/vips/vips.desc: * updated vips (7.10.17 -> 7.10.18) 23:13 < sepp> :) 23:15 -!- sparc-kly [n=sparc-kl@64.237.247.68] has quit [Read error: 113 (No route to host)] 23:45 -!- madtux [i=miguel@pf0.hostarica.com] has joined #t2 23:45 -!- madtux [i=miguel@pf0.hostarica.com] has quit [Client Quit] --- Log closed Tue Jan 31 00:00:57 2006